And 1000kv substation equipments have been satisfactorily energized for ten years at the field test site, so TEPCO has learned a great deal about UHV technologies through first-hand experience.
The study of double staged and deoxidized technology by means of experimental, numerical simulation and reaction mechanism methods has been performed in this paper.
To meet the requirements of slope support for TGP, specially for its permanent lock's high slope, a special test on non cohesive prestressed cable anchor has been performed in situ.
Using a seam auto - tracking technique with arc sensor, seam tracking experiments for circumferential lap weld of automobile air storage vessel have been performed in this paper.
This usually translates into trying to first verify the simplest constraints of the problems, usually the ones that involve the least number of variables.
One of causes that ore-dressing experiments of Ningxiang-type iron ore hasn t got breakthrough is insufficient study of technological mineralogy of ore.
One of the top track coaches in the U.S., Bowernan was also known for experimenting with the design of running shoes in an attempt to make them lighter and more shock-absorbent.
The test results show that the quicker the initial set of plaster the greater the difference between the initial setting times of the plaster with addition of s type retarder.
Two researchers, Karthik Muralidharan of the University of California at San Diego and Venkatesh Sundararaman of the World Bank, tested that idea in 300 state-run schools in Andhra Pradesh in India.
Exploring the darker aspects of this technology, he moved rapidly from CD-ROMs to actual games in which spectator participation became increasingly important.
It is concluded that only by modifying the drainage system of thickener and using the existing thickeners, can the underflow density be greatly increased.
The test has also proved that both types of immersion nozzles, one with five holes and the other "v"-shaped design are very effective in decreasing the penetration depths in moulds.